News

Multi-5

The Multi-5 is a new AB axes cutting head rail system for retrofitting to existing pure waterjet machines to enable a 5 axes cutting function. Fitted with up to 6 cutting heads to give high productivity where 5 axes cutting is required. Also available as part of a new waterjet system from QteC.
 

SteelWave

A new type of cutting plan designed to reduce, or as in most cases remove the necessity to use expensive underlay materials. With minimal backsplash from the individual exchangeable wave elements, productivity can also be increased by removing the need to continuously replace underlay material between cutting cycles.
 

EasyCut-S

QteC has developed a sliding tabel.
The EasyCut-S with a sliding tabel is available
in sizes up to 1500 x 2000 mm.
 

New Business partner

QteC are working together with Dannozzle and are pleased to offer a new range of nozzles for hydro cleaning.
Dannozzle are specialists in the developement of nozzles for cleaning of evapourators and heat exchangers. Dannozzle has developed a unique nozzle that removes hard deposit in pipes with a much lower pressure than seen before.
 

Waterjet machines

QteC offer a wide selection of different waterjet machines, in all sizes, to meet the customers demands.

Spare parts and Service

QteC offer spare and consumable parts as well as service and maintenance of almost every high pressure pump manufacturer on the market.

New homepage

Our new homepage is now up and running.
It's now possible to receive our news letter.
Name:
Code:

Logo WARDJet

 
  
WARDJet offer a wide program of machines available in many different standard sizes to suit customer requirements. All machines can be equiped with a wide selection of options, such as 5-Axis, height sensor and Abrasive Removal system. Further information here.
 

Link to Options for WARDJet

 
WARDJet offer 3 different controllers for the machines, further information here. 

Contact QteC for further infomation about WARDJet machines.

Click on one of the photos to enlarge.

Link to Controller for WARDJet

 

Z-45
  • Cutting envolope: 1250x1500 mm
  • Standard with one Z-cariage - Additional Z-carriages can be mounted.
  • Up to 600 mm Z-axis travel.
  • 5-axis head optional.
  • XL-series controller as standard
ZXA-513
  • Cutting envolope: 1540x3680 mm
  • Standard with one Z-cariage - Additional Z-carriages can be mounted.
  • Up to 600 mm Z-axis travel
  • 5-axis head optional.
  • XL-series controller as standard.
Z-613
  • Cutting envolope: 1830x3960 mm
  • Standard with one Z-cariage - Additional Z-carriages can be mounted.
  • Up to 600 mm Z-axis travel.
  • 5-axis head optional.
  • XL-series controller as standard.
ZX-2043
  • Cutting envolope: 2020x4020 mm
  • Standard with one Z-cariage - Additional Z-carriages can be mounted.
  • Up to 600 mm Z-axis travel.
  • 5-axis head optional.
  • XL-series controller as standard.
JX-813
  • Cutting envolope: 2440x3660 mm.
  • Cutting speed up to 1250 mm/sek or 75 m/min.
  • Stainless steel conveyor
  • XL-series controller as standard.
Z-813-5
  • Cutting envolope: 2438x3960 mm
  • Standard with one Z-cariage - Additional Z-carriages can be mounted.
  • Up to 600 mm Z-axis travel.
  • 5-axis.
  • X-Classic controller.
LX-1010
  • Cutting envolope: 3140x3140 mm.
  • Standard with one Z-cariage - Additional Z-carriages can be mounted.
  • Cutting speed up to 1000 mm/sek or 60 m/min.
  • 5-axis head optional.
  • Stainless steel conveyor.
R-1213
  • Cutting envolope: 3650x3950 mm
  • Standard with one Z-cariage - Additional Z-carriages can be mounted.
  • XL-series controler as standard.
  • 5-axis head optional.
R-X013
  • Cutting envolopes:  R-2013 =   6100x3950 mm
                                        R-3013 =   9150x3950 mm
                                        R-4013 = 12200x3950 mm
  • Standard with one Z-cariage - Additional Z-carriages can be mounted.
  • 5-axis head optional.
  • XL-series controller as standard.