HomeProducts
Waterjet cuttingAutomation & Alu-profilesLaser equipmentMeasurement
NewsTradeshowsUsed equipmentAbout QteCLinksContactFind us
General Purpose
Hydro Cleaning Stop/PusherCross - CuttingVacuum Holding
ProScale Model 150ProScale Model 180ProScale Model 250ProScale model 280ProScale Model 380ProScale Model 580
Quality control Woodworking ProductsInterfaces & Data Acquisition Digital ReadoutsNews
Multi-5The Multi-5 is a new AB axes cutting head rail system for retrofitting to existing pure waterjet machines to enable a 5 axes cutting function. Fitted with up to 6 cutting heads to give high productivity where 5 axes cutting is required. Also available as part of a new waterjet system from QteC.SteelWaveA new type of cutting plan designed to reduce, or as in most cases remove the necessity to use expensive underlay materials. With minimal backsplash from the individual exchangeable wave elements, productivity can also be increased by removing the need to continuously replace underlay material between cutting cycles.EasyCut-SQteC has developed a sliding tabel.
The EasyCut-S with a sliding tabel is available
in sizes up to 1500 x 2000 mm.
New Business partnerQteC are working together with Dannozzle and are pleased to offer a new range of nozzles for hydro cleaning.
Dannozzle are specialists in the developement of nozzles for cleaning of evapourators and heat exchangers. Dannozzle has developed a unique nozzle that removes hard deposit in pipes with a much lower pressure than seen before.
Waterjet machinesQteC offer a wide selection of different waterjet machines, in all sizes, to meet the customers demands.
Spare parts and ServiceQteC offer spare and consumable parts as well as service and maintenance of almost every high pressure pump manufacturer on the market.
New homepageOur new homepage is now up and running.
It's now possible to receive our news letter. |
ProKit 580
 | |||||||||
|
The ProKit 580 is an ideal foundation for a 'build-it-yourself" dimensional measuring system. This product starts with a ProScale Model 580 measuring system with its 4 friction bearing sliding carriage assembly. Added to the sliding carriage is an 200mm x 25mm hard anodized jaw and a quick grip handle to move the entire assembly.
Contact QteC if you have any questions or need further information about ProKit 580 | |||||||||
Properties: | |||||||||
|
With ProTable, you can measure or position your system in absolute mode, switch to incremental mode for relative measurements, and return to the absolute mode with no loss of measurement or accuracy. | ||||||||
|
Front panel settings for Zero, Plus & Minus Offsets, Data Hold, Data Send, and Units Mode. | ||||||||
Specifications: | |||||||||
|
Up to 4800 mm | ||||||||
|
<0,51 max - or <0,20 mm, With compensation | ||||||||
|
±0,01 mm | ||||||||
| |||||||||
