News

Multi-5

The Multi-5 is a new AB axes cutting head rail system for retrofitting to existing pure waterjet machines to enable a 5 axes cutting function. Fitted with up to 6 cutting heads to give high productivity where 5 axes cutting is required. Also available as part of a new waterjet system from QteC.
 

SteelWave

A new type of cutting plan designed to reduce, or as in most cases remove the necessity to use expensive underlay materials. With minimal backsplash from the individual exchangeable wave elements, productivity can also be increased by removing the need to continuously replace underlay material between cutting cycles.
 

EasyCut-S

QteC has developed a sliding tabel.
The EasyCut-S with a sliding tabel is available
in sizes up to 1500 x 2000 mm.
 

New Business partner

QteC are working together with Dannozzle and are pleased to offer a new range of nozzles for hydro cleaning.
Dannozzle are specialists in the developement of nozzles for cleaning of evapourators and heat exchangers. Dannozzle has developed a unique nozzle that removes hard deposit in pipes with a much lower pressure than seen before.
 

Waterjet machines

QteC offer a wide selection of different waterjet machines, in all sizes, to meet the customers demands.

Spare parts and Service

QteC offer spare and consumable parts as well as service and maintenance of almost every high pressure pump manufacturer on the market.

New homepage

Our new homepage is now up and running.
It's now possible to receive our news letter.
Name:
Code:

ProScale Model 580

The ProScale Model 580 uses Incremental inductive measurement technology.
It is a general purpose measuring device with an integrated linear friction bearing system. The Model 580 uses a custom extrusion design incorporating a dual rail with four friction bearings. A sliding carriage assembly captures the Encoder and moves along the scale on four friction bearings minimizing pitch & yaw of the encoder for the utmost in accuracy and repeatability.
The Model 580 was designed as a stand alone measuring system or to be the foundation of systems designed by end users for their particular measurement applications.

 
Contact QteC if you have any questions or need further information about ProScale 

 

Properties:

  • High speed Encoder:
The carriage/encoder can be moved up to 60 inch/s (1500 mm/s)
  • Compensation:
Model 580 systems can be ordered with a special General Purpose Digital Readout incorporating both non-linear scaling and temperature compensation
  • High noise immunity:
With ProScale Inductive technology,, the likelihood of motor electrical noise, magnetic fields, or power transients affecting the measurement accuracy is reduced.
  • Scalability:
The Model 580 supports multiple carriage assemblies/ Encoders and Readouts operating simultaneously on the same Scale.

 

Specifications:

  • Accurate
±0,002 in/ft - <0,20 mm max error (<0,13 mm with compensation)
  • Model 580-4
Measurements up to 4 feet (1200 mm)
  • Model 580-8
Measurements up to 8 feet (2400 mm)
  • Model 580-12
Measurements up to 12 feet (3600 mm)
  • Model 580-16
Measurements up to 16 feet (4800 mm)
  • Max velocity 
1500 mm/s
 

Dimensions:
Click on the sketch for PDF
Proscale 580 - sketch

 

Digital Readouts:

Three digital Readout models are available for the model 580 system.
 
Bacis   General Purpose    Indbygning      
 

 

Encorder:

 
læsehoved
 
 
 
 
The standard inductive Encoder cable length is 3 inches (75 mm)
  • 12 inches (300 mm)
  • 24 inches (600 mm)
  • 72 inches (1800 mm)

 

Related products: