Multi-5The Multi-5 is a new AB axes cutting head rail system for retrofitting to existing pure waterjet machines to enable a 5 axes cutting function. Fitted with up to 6 cutting heads to give high productivity where 5 axes cutting is required. Also available as part of a new waterjet system from QteC.
SteelWaveA new type of cutting plan designed to reduce, or as in most cases remove the necessity to use expensive underlay materials. With minimal backsplash from the individual exchangeable wave elements, productivity can also be increased by removing the need to continuously replace underlay material between cutting cycles.
QteC has developed a sliding tabel.
The EasyCut-S with a sliding tabel is available
in sizes up to 1500 x 2000 mm.
New Business partner
QteC are working together with Dannozzle and are pleased to offer a new range of nozzles for hydro cleaning.
Dannozzle are specialists in the developement of nozzles for cleaning of evapourators and heat exchangers. Dannozzle has developed a unique nozzle that removes hard deposit in pipes with a much lower pressure than seen before.
QteC offer a wide selection of different waterjet machines, in all sizes, to meet the customers demands.
Spare parts and Service
QteC offer spare and consumable parts as well as service and maintenance of almost every high pressure pump manufacturer on the market.
Our new homepage is now up and running.
It's now possible to receive our news letter.
QteC cooperates with one of europes leading manufacturers of laser equipment, Z-laser.
At QteC we are specialists in line lasers and 2D laser positioning with many years of experience.
LASER is an acronym for "Light amplification by stimulated emission of radiation".
The first lasers were gas lasers, today we have diode laser.
Z-laser produces lasers with serveral different colours of emitted light in the visual range (400 nm to 700 nm) as well as in the invisable range, ultraviolet (375 nm to 400 nm) or infrared (700 nm to 980 nm).
The laser diode diffuses the light in all directions, as shown to the right. By putting a collimating lens in front of the laser diode the laser light will be rectified to a small beam.
To produce a line another lens must be added in front of the collimating lens, to focus the light beam into a thin line.
Z-laser offers a number of lenses to form different shapes among other lines, cross, parallel lines and circles.
Laser equipment is classified into different safety classes 1M, 2, 2M ,3R and 3B. Use the link to the right to find a datasheet with a summary over the different classes. Or you can find a more detailed description here.
|Click on one of the links below for further information, or contact QteC|