HomeProducts
Waterjet cuttingAutomation & Alu-profilesLaser equipmentMeasurement
NewsTradeshowsUsed equipmentAbout QteCLinksContactFind us
General Purpose
Hydro Cleaning Stop/PusherCross - CuttingVacuum Holding
ProScale Model 150ProScale Model 180ProScale Model 250ProScale model 280ProScale Model 380ProScale Model 580
Quality control Woodworking ProductsInterfaces & Data Acquisition Digital ReadoutsNews
Multi-5The Multi-5 is a new AB axes cutting head rail system for retrofitting to existing pure waterjet machines to enable a 5 axes cutting function. Fitted with up to 6 cutting heads to give high productivity where 5 axes cutting is required. Also available as part of a new waterjet system from QteC.SteelWaveA new type of cutting plan designed to reduce, or as in most cases remove the necessity to use expensive underlay materials. With minimal backsplash from the individual exchangeable wave elements, productivity can also be increased by removing the need to continuously replace underlay material between cutting cycles.EasyCut-SQteC has developed a sliding tabel.
The EasyCut-S with a sliding tabel is available
in sizes up to 1500 x 2000 mm.
New Business partnerQteC are working together with Dannozzle and are pleased to offer a new range of nozzles for hydro cleaning.
Dannozzle are specialists in the developement of nozzles for cleaning of evapourators and heat exchangers. Dannozzle has developed a unique nozzle that removes hard deposit in pipes with a much lower pressure than seen before.
Waterjet machinesQteC offer a wide selection of different waterjet machines, in all sizes, to meet the customers demands.
Spare parts and ServiceQteC offer spare and consumable parts as well as service and maintenance of almost every high pressure pump manufacturer on the market.
New homepageOur new homepage is now up and running.
It's now possible to receive our news letter. |
Hydro Cleaning
|
QteC can offer equipment for cleaning and water blasting of surfaces with a water pressure of between 200 and 4100 bar, in cooperation with JetEdge and Dannozzle.
Waterjet cleaning and water blasting systems are a fast, easy way to blast off tough build ups of paint, epoxy, corrosion, scale, chemical contaminants and other surface deposits without damaging underlying surfaces.
High PressureJetEdge offer equipment for the removal of paint and cleaning of surfaces, such as ship decking, concrete flooring, asphalt, etc. For this application, JetEdge can offer several mobile high pressure pumps able of producing 4100 bar at a maximum capacity of 27 l/min.
See JetEdge hydro cleaning in action.
Contact QteC for more informtion about Hydro Cleaning.
Medium PressureDannozzle are specialists within the design and development of cleaning heads and orifices for use with medium pressure water, 200 - 1000 bar. These heads are designed specifically for cleaning the internal surfaces of tubular structures such as heat exchangers, evaporators, condensors, etc. and are able to remove hardened deposits with a much lower pressure than previously possible.
Dannozzle have a wide selection of heads, providing a cleaning solution for all types of tubing.
Click on a photo for a short video of a Dannozzle in action.
VibRotorDannozzles VibRotor is totally unique, and developed to clean tubing from 35mm in diameter. Able to remove scale build ups in heat exchangers and any other tubing by using water pressure to vibrate the cleaning head at a much lower pressure than previously possible.
Click on a photo for a short video of the VibRotor in action.
Contact QteC for more information about Dannozzle.
Click on a Photo below for more info about hydro cleaning. |
 |
VibRotor
|
 |
Ultra Deckblaster
|
 |
Gyra Jet LP
|
 |
UltraLite Lance
|
|
|
Medium pressure
|
 |
Mobile HP-pumps
|
