HomeProducts
Waterjet cuttingAutomation & Alu-profilesLaser equipmentMeasurement
NewsTradeshowsUsed equipmentAbout QteCLinksContactFind us
General Purpose
Hydro Cleaning Stop/PusherCross - CuttingVacuum Holding
ProScale Model 150ProScale Model 180ProScale Model 250ProScale model 280ProScale Model 380ProScale Model 580
Quality control Woodworking ProductsInterfaces & Data Acquisition Digital ReadoutsNews
Multi-5The Multi-5 is a new AB axes cutting head rail system for retrofitting to existing pure waterjet machines to enable a 5 axes cutting function. Fitted with up to 6 cutting heads to give high productivity where 5 axes cutting is required. Also available as part of a new waterjet system from QteC.SteelWaveA new type of cutting plan designed to reduce, or as in most cases remove the necessity to use expensive underlay materials. With minimal backsplash from the individual exchangeable wave elements, productivity can also be increased by removing the need to continuously replace underlay material between cutting cycles.EasyCut-SQteC has developed a sliding tabel.
The EasyCut-S with a sliding tabel is available
in sizes up to 1500 x 2000 mm.
New Business partnerQteC are working together with Dannozzle and are pleased to offer a new range of nozzles for hydro cleaning.
Dannozzle are specialists in the developement of nozzles for cleaning of evapourators and heat exchangers. Dannozzle has developed a unique nozzle that removes hard deposit in pipes with a much lower pressure than seen before.
Waterjet machinesQteC offer a wide selection of different waterjet machines, in all sizes, to meet the customers demands.
Spare parts and ServiceQteC offer spare and consumable parts as well as service and maintenance of almost every high pressure pump manufacturer on the market.
New homepageOur new homepage is now up and running.
It's now possible to receive our news letter. |
News
Multi-5QteC has developed a new cutting head rail to produce a bevelled cut.
The cutting head rail can be equiped with up to six cutting heads, which all can be moved in sync in the AB-axis, there by enabling you to cut up to six bevelled items at a time.
The distance between cutting heads is also easily adjusted.
View PDF of the Multi-5 cutting head rail here |
 |
SteelWaveA new type of cutting plan designed to reduce, or as in most cases remove the necessity to use expensive underlay materials. With minimal backsplash from the individaul exchangeable wave elements, productivity can also be increased by removing the need to continuously replace underlay material between cutting cycles.
View PDF of the SteelWave cutting plan here. |
 |
EasyCut PW-SQteC has developed a draw leaf tabel for the EasyCut machine. The advantage with a draw leaf tabel is the possibility to remove and handle materials and parts from one of the tabels at the same time the machine cuts on the other tabel.
The mashine has the same properties as a standard EasyCut machine.
A water catching tank is placed under each table to keep the floor free of water and cutting waste.
Click here to view a PDF on the EasyCut-S |
 |
Newsletter
|
QteC will in the future send newsletters, with news, new initiatives and special offers, to all interested.
Fill out the form below to receive our next newsletter. |