HomeProducts
Waterjet cuttingAutomation & Alu-profilesLaser equipmentMeasurement
NewsTradeshowsUsed equipmentAbout QteCLinksContactFind us
General Purpose
Hydro Cleaning Stop/PusherCross - CuttingVacuum Holding
ProScale Model 150ProScale Model 180ProScale Model 250ProScale model 280ProScale Model 380ProScale Model 580
Quality control Woodworking ProductsInterfaces & Data Acquisition Digital ReadoutsNews
Multi-5The Multi-5 is a new AB axes cutting head rail system for retrofitting to existing pure waterjet machines to enable a 5 axes cutting function. Fitted with up to 6 cutting heads to give high productivity where 5 axes cutting is required. Also available as part of a new waterjet system from QteC.SteelWaveA new type of cutting plan designed to reduce, or as in most cases remove the necessity to use expensive underlay materials. With minimal backsplash from the individual exchangeable wave elements, productivity can also be increased by removing the need to continuously replace underlay material between cutting cycles.EasyCut-SQteC has developed a sliding tabel.
The EasyCut-S with a sliding tabel is available
in sizes up to 1500 x 2000 mm.
New Business partnerQteC are working together with Dannozzle and are pleased to offer a new range of nozzles for hydro cleaning.
Dannozzle are specialists in the developement of nozzles for cleaning of evapourators and heat exchangers. Dannozzle has developed a unique nozzle that removes hard deposit in pipes with a much lower pressure than seen before.
Waterjet machinesQteC offer a wide selection of different waterjet machines, in all sizes, to meet the customers demands.
Spare parts and ServiceQteC offer spare and consumable parts as well as service and maintenance of almost every high pressure pump manufacturer on the market.
New homepageOur new homepage is now up and running.
It's now possible to receive our news letter. |
Find us
 QteC's adress is: Lundsbjerg Industrivej 17, 6200 Aabenraa
Directions: If you arrive from north along the motorway E45 you take the exit 71, towards Sønderborg on Sønderborgvej (Route 41). Continue to the roundabout approx. 3 km. Take the 3. exit towards Åbenrå on Tinglevvej (Route 42). Drive approx. 500 and turn right on Lundsbjerg industrivej. Drive approx 1500 m and turn right at Energi Syd. QteC is at the end of the street on the right. If you arrive from the south along the motorway E45, you take exit 72. towards Stubbæk and turn right towards Åbnerå (Route 42) approx. 3.5 km. Dríve through the roundabout 2. exit and continue on Tinglevvej (Route 42) approx. 500 m and turn right on Lundsbjerg Industrivej. Drive approx 1500 m and turn right at Energi Syd. QteC is at the end of the street on the right. |